How do I connect and configure the LevelOne GEP-0820W120 8-Port Gigabit PoE Switch? (equip GEP-0820W120 Gigabit PoE Switch Instruction Guide)

Answer

manuals.plus

Jan 23, 2025 - 08:28 PM


To connect and configure the LevelOne GEP-0820W120 8-Port Gigabit PoE Switch, please follow these steps:

1. Hardware Setup:
   a. Connect one end of an Ethernet cable to the LAN port of your modem or router.
   b. Connect the other end of the Ethernet cable to any of the 8 ports on the GEP-0820W120 switch.
   c. Repeat step b for any additional devices you want to connect to the switch.
   d. Connect the power adapter to the power input on the switch and plug it into a power outlet.

2. Power over Ethernet (PoE) Setup:
   a. If you have PoE devices, connect them to any of the 8 PoE ports on the switch using Ethernet cables.
   b. The switch will automatically detect and provide power to the connected PoE devices.

3. Configuration (Optional):
   a. The GEP-0820W120 switch is a plug-and-play device, so it does not require any additional configuration.
   b. However, if you want to access advanced settings or monitor the switch, you can connect a computer to one of the switch ports using an Ethernet cable.
   c. Open a web browser on your computer and enter the default IP address of the switch (usually mentioned in the Quick Installation Guide or user manual).
   d. Log in to the switch's web-based management interface using the default username and password (also mentioned in the Quick Installation Guide or user manual).
   e. From the management interface, you can configure various settings such as VLANs, QoS, and security options.

Please refer to the Quick Installation Guide or user manual provided with the LevelOne GEP-0820W120 switch for more detailed instructions and information on advanced configuration options.