User Manual Q&AAnswer
Jan 23, 2025 - 08:26 PM
To connect your Jabra Engage 55 Mono MS DECT Wireless Headset to your computer, please follow these steps:
1. Turn on your Jabra Engage 55 Mono MS DECT Wireless Headset by pressing and holding the power button until the LED light turns on.
2. Connect the Jabra Link Bluetooth adapter (included in the package) to an available USB port on your computer. Make sure the adapter is securely plugged in.
3. The headset will automatically enter pairing mode. The LED light on the headset will start flashing blue.
4. On your computer, open the Bluetooth settings. This can usually be found in the system tray or in the settings menu.
5. In the Bluetooth settings, search for available devices. You should see "Jabra Engage 55" or a similar name in the list of available devices.
6. Click on the Jabra Engage 55 device to pair it with your computer. Follow any on-screen prompts to complete the pairing process.
7. Once the pairing is successful, the LED light on the headset will turn solid blue, indicating that it is connected to your computer.
You can now use your Jabra Engage 55 Mono MS DECT Wireless Headset for making calls and listening to audio on your computer. Make sure to select the headset as the audio output and input device in your computer's sound settings.
Please note that these instructions are based on the general setup process for the Jabra Engage 55 Mono MS DECT Wireless Headset. For more specific instructions or troubleshooting, please refer to the user manual provided with the headset or visit the Jabra support page for further assistance.
Add New Comment