User Manual Q&AAnswer
Jan 23, 2025 - 08:22 PM
To connect the RGB LED monitors to the NanoRS RS166 Gaming Mount, please follow these steps:
1. Before connecting the USB cable, make sure to finish the setup steps mentioned in the manual.
2. Ensure that you have received all the necessary parts according to the component checklist provided with the product. If any parts are missing or faulty, contact your local distributor for a replacement.
3. Read the entire instruction manual before starting the installation and assembly process.
4. Use the provided tools and safety gear during the installation. It is recommended to have this product installed by professionals.
5. Make sure that the supporting surface can safely support the combined weight of the equipment and all attached hardware and components.
6. Use the mounting screws provided, but do not over tighten them.
7. Once the mount is securely installed, you can connect your RGB LED monitors to the mount using the appropriate cables.
8. Ensure that the monitors are properly balanced on the mount. To adjust the spring tension for balancing, use the supplied Allen Key as follows:
- If the arm drops, turn the adjustment xxxx clockwise until it stays in a horizontal position.
- If the arm rises, turn the adjustment xxxx counter-clockwise until it stays in a horizontal position.
Note: Always keep the arm in a horizontal position while making adjustments to avoid damage to the monitors or mount.
If you have any further questions or need additional assistance, please contact your local distributor for support.
Add New Comment