User Manual Q&AAnswer
Jan 23, 2025 - 10:30 AM
To connect the Furrion FSBNN3MR-BL Aurora 2.0 Channel Outdoor Soundbar to your TV, follow these steps:
1. Make sure the Soundbar and TV are both powered off and unplugged.
2. Locate the audio output ports on your TV. The Soundbar can be connected to your TV using the Coaxial, RCA, or AUX input.
3. Choose the appropriate cable based on the audio output ports on your TV. If your TV has a Coaxial output, use the provided Coaxial cable. If your TV has RCA outputs, use an RCA cable. If your TV has a 3.5mm AUX output, use a 3.5mm AUX cable.
4. Connect one end of the chosen cable to the corresponding audio output ports on your TV.
5. Connect the other end of the cable to the corresponding input port on the Soundbar. The Coaxial cable should be connected to the "COAX in" port, the RCA cable should be connected to the "RCA (L-R) in" ports, and the AUX cable should be connected to the "AUX in" port.
6. Once the connections are made, power on both the Soundbar and the TV.
7. Use the remote control or the buttons on the Soundbar to select the appropriate input source. Press the "M" button on the Soundbar or the "SOURCE" button on the remote control to cycle through the available input sources (AUX, RCA, COAX).
8. Adjust the volume using the volume buttons on the Soundbar or the remote control.
Note: The specific steps may vary slightly depending on the model of your TV and the available audio output ports. Refer to your TV's user manual for more detailed instructions on connecting external audio devices.
For more information and troubleshooting tips, refer to the Furrion FSBNN3MR-BL Aurora 2.0 Channel Outdoor Soundbar User Guide.
Add New Comment