User Manual Q&AAnswer
Jan 23, 2025 - 10:26 AM
To connect your device to the Sharp XG-PH70X 4000-LUMENS Projector, follow these steps:
1. Check the available ports on both your device and the projector. The XG-PH70X projector offers various input ports, including HDMI, DVI-D, VGA, component video, S-video, and composite video.
2. Choose the appropriate cable for your device. For example, if your device has an HDMI output, use an HDMI cable. If your device has a VGA output, use a VGA cable.
3. Connect one end of the cable to the corresponding output port on your device and the other end to the corresponding input port on the projector. Make sure the connections are secure.
4. Turn on your device and the projector.
5. On the projector's remote control, press the "Input" button to select the input source that matches the port you connected your device to. Use the arrow keys on the remote control to navigate through the available input sources.
6. Once you have selected the correct input source, your device's screen should be displayed on the projector.
Note: Depending on your device and the projector's capabilities, you may need to adjust the display settings on your device to ensure optimal resolution and aspect ratio.
For more detailed instructions and illustrations, please refer to the Sharp XG-PH70X 4000-LUMENS Projector Operation Manual provided in the link above.
Add New Comment