How do I connect my device to the InFocus IN42 3500-LUMEN LCD XGA Projector? (INFOCUS IN42 3500-LUMEN LCD XGA Projector User Guide)

Answer

manuals.plus

Jan 23, 2025 - 10:25 AM


To connect your device to the InFocus IN42 projector, follow these steps:

1. Check the available ports on your device and the projector. The IN42 projector offers various input options, including VGA, HDMI, S-Video, and composite video.

2. Determine the appropriate cable for your device. For example, if your device has a VGA output, you will need a VGA cable. If your device has an HDMI output, you will need an HDMI cable.

3. Connect one end of the cable to the corresponding output port on your device. For example, if you are using a VGA cable, connect the VGA end to your device's VGA output.

4. Connect the other end of the cable to the corresponding input port on the IN42 projector. For example, if you are using a VGA cable, connect the VGA end to the VGA input on the projector.

5. Once the cable is connected, power on both your device and the projector.

6. On the projector's remote control, press the "Source" button to select the input source you connected your device to (e.g., VGA, HDMI, etc.). You can also use the "Input" button on the projector itself.

7. If necessary, adjust the projector's settings to optimize the display. You can refer to the user guide for detailed instructions on adjusting settings such as brightness, contrast, and aspect ratio.

8. Your device's screen should now be mirrored or extended onto the projector's display. If not, ensure that the correct input source is selected and that the cable connections are secure.

Please note that specific instructions and options may vary depending on your device and the version of the IN42 projector you have. For more detailed information, refer to the user guide provided with the projector (linked above).