User Manual Q&AAnswer
Jan 23, 2025 - 10:04 AM
To connect your Dell 1610HD Smart DLP Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system, but typically you can access display settings by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, choose the option to extend or duplicate your desktop to the projector.
8. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, please refer to the Dell 1610HD Smart DLP Projector User's Guide provided in the link above.
Add New Comment