Answer
Jan 23, 2025 - 09:48 AM
To connect your Boxlight X27NST Eco Short Throw Projector to your computer, follow these steps:
1. Ensure that your computer and the projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom settings on the projector as needed.
For more detailed instructions and illustrations, please refer to the user manual for the Boxlight X27NST Eco Short Throw Projector.
Add New Comment