User Manual Q&AAnswer
Jan 23, 2025 - 09:44 AM
To connect your Innocube IC100T Smart Beam Projector to your device, you can use either the HDMI or MHL video input options. Here are the steps to connect:
1. For HDMI connection:
a. Ensure that your device has an HDMI output port.
b. Connect one end of the HDMI cable to the HDMI output port of your device.
c. Connect the other end of the HDMI cable to the HDMI input port of the projector.
d. Once connected, select the HDMI input source on the projector using the remote control or the projector's menu.
2. For MHL connection:
a. Ensure that your device supports MHL (Mobile High-Definition Link) and has an MHL output port.
b. Connect one end of the MHL cable to the MHL output port of your device.
c. Connect the other end of the MHL cable to the MHL input port of the projector.
d. Once connected, select the MHL input source on the projector using the remote control or the projector's menu.
Please note that if you are using a Samsung Galaxy Tab, you may need to use the Samsung Galaxy Tab Converter (5 to 11 Pin) included in the box to connect it to the projector.
For further assistance or troubleshooting, refer to the user manual provided with the Innocube IC100T Smart Beam Projector.
Add New Comment