How do I install the SSV Works 11-20 CAN-AM COM1000XT 4 Speaker system? (SSV Works 11-20 CAN-AM COM1000XT 4 Speaker User Guide)

Answer

manuals.plus

Jan 23, 2025 - 09:25 AM

To install the SSV Works 11-20 CAN-AM COM1000XT 4 Speaker system, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:

1. Locate the battery in your vehicle before starting the installation. The battery could be located under the dash, under the rear passenger seat, or under the center of the bed, depending on the vehicle model and trim level.

2. It is recommended to have another person assist you during the installation.

3. Use wire crimpers and wire strippers as necessary for the installation.

4. Gather the necessary tools for installation, including wire crimpers, wire strippers, a wrench for the battery terminal, and a #3 Phillips screwdriver.

5. Refer to the parts list in the manual to ensure you have all the required components for installation.

6. Place the WP3-CM04A enclosure into location from the underside of the cage, with one person on either side of the vehicle.

7. While holding the enclosure securely toward the front crossbar of the cage, loosely install the 4 brackets using the provided screws.

8. Once the enclosure is centered side to side, press the bracket toward the center of the vehicle and tighten the brackets using the #3 screwdriver. It may be necessary to re-adjust the brackets after tightening to ensure the enclosure is properly secured.

9. Route the Power/Ground loom to the battery location using the zip ties provided. Make sure to keep the wiring away from any moving parts or sharp metal.

10. Use the supplied extension power wire to complete the run from the WP3-CMO4A to your battery. Strip back 1/4”-1/2” of wire to make your connections.

11. Crimp the supplied fuse holder onto the end of the red wire and attach it to the battery’s positive terminal.

12. Crimp the supplied ring terminal to the black wire and attach it to the battery’s negative terminal.

Please refer to the user manual for any additional instructions or specific details related to your vehicle model. If you have any further questions or need assistance, you can contact SSV Works for support.