User Manual Q&AAnswer
Jan 23, 2025 - 09:17 AM
To connect the GEYGUY G521-1 Passive Bookshelf Speakers to your amplifier or receiver, you will need speaker wire. Here are the steps to follow:
1. Make sure your amplifier or receiver is turned off and unplugged from the power source.
2. Identify the speaker terminals on the back of your amplifier or receiver. They are usually labeled as "Speaker Out" or "Speaker Output."
3. Strip the insulation from the ends of your speaker wire to expose the bare wire.
4. Insert one end of the speaker wire into the positive (+) terminal of the amplifier or receiver. The positive terminal is usually marked with a "+" symbol or a red color.
5. Insert the other end of the speaker wire into the corresponding positive (+) terminal on the back of the GEYGUY G521-1 Passive Bookshelf Speakers. The positive terminal on the speakers is usually marked with a "+" symbol or a red color.
6. Repeat steps 4 and 5 for the negative (-) terminals. The negative terminal is usually marked with a "-" symbol or a black color.
7. Make sure the speaker wire is securely connected to both the amplifier or receiver and the speakers.
8. Repeat the above steps for the second speaker, connecting it to the other channel of your amplifier or receiver.
9. Once both speakers are connected, double-check all the connections to ensure they are secure.
10. Plug in your amplifier or receiver and turn it on.
11. Adjust the volume and other settings on your amplifier or receiver as desired.
Please refer to the user manual for additional information and diagrams if needed.
Add New Comment