User Manual Q&AAnswer
Jan 23, 2025 - 08:45 AM
Balancing the Sky-Watcher EQ6-R German Equatorial Telescope Mount is an important step to ensure smooth and accurate tracking. Here are the steps to balance the mount:
1. Loosen the R.A. Clutch and rotate the R.A. Axis until the counterweight rod is parallel to the ground. Tighten the R.A. Clutch.
2. Loosen the Dec. clutch and rotate the Dec. axis until the telescope is parallel to the ground. Tighten the Dec. clutch.
3. Loosen the thumb screws on the counterweights.
4. Hold the counterweight rod with one hand, release the R.A. Clutch, and adjust the counterweights along the rod until the mount is able to remain stationary without support. Tighten the thumb screws on the counterweights again.
5. Rotate the R.A. Axis; the mount should remain relatively balanced along different angles. Once this is confirmed, return the mount to its original position described in Step 1 and tighten the R.A. Clutch again.
6. Hold the telescope with one hand and release the Dec. clutch.
7. Slowly let go of the telescope and check for any rotational movements. If there is a movement, adjust the telescope's position with relation to the tube rings and saddle. The final position of the telescope should remain stationary without support.
By following these steps, you can properly balance the Sky-Watcher EQ6-R German Equatorial Telescope Mount for optimal performance. For more detailed instructions and illustrations, please refer to the user manual provided.
Add New Comment