User Manual Q&AAnswer
Jan 23, 2025 - 07:58 AM
To assemble and use the WRNRN 56mm Large View HD Monocular Telescope, please follow these steps:
1. Assemble the phone holder: Take the phone holder and orient the fittings correctly. Be careful when taking them apart. Pay attention to the correct orientation of the fittings.
2. Secure your smartphone: Pull the spring button on the phone holder according to the size of your smartphone to hold it firmly and prevent it from falling. Be cautious of the springs in the phone holder that may harm your hands.
3. Align the phone and monocular: Adjust your phone to the position where the phone lens and monocular eyepiece are aligned. Fix it firmly in place.
4. Attach the monocular to the tripod: Unfold the tripod and attach the monocular to it. Tighten the side screws to secure the monocular.
5. Adjust the eyepiece: Twist up the eyepiece before connecting the monocular to the phone adapter.
6. Focus the image: Rotate the middle xxxx until the image is sharp and clear.
If you have completed all the steps and there is still no image on your phone, please try step 3 again. Find out the working camera on your phone and adjust the position of your phone camera and monocular eyepiece.
You can also zoom in with your fingers on the smartphone screen to get a clearer and more detailed image. The monocular telescope comes with a quick-alignment phone adapter compatible with 99.9% of smartphones, allowing you to capture clear photos and videos of what you observe.
For further assistance, please refer to the WRNRN 56mm Large View HD Monocular Telescope Instruction Manual provided with the product.
Add New Comment