User Manual Q&AAnswer
Jan 23, 2025 - 07:05 AM
To set the time on the CDN TM8 Digital Timer and Clock Memory, follow these steps:
1. Move the red slide switch to CLOCK mode.
2. Use the HR (hours) and MIN (minutes) keys to set the desired time. Press the keys once to advance the numeral by one, or hold the key down to advance the numerals rapidly.
3. To set the seconds, use the SEC (seconds) key. Pressing the SEC key will reset the displayed seconds to "00" and advance the minute figure by 1 minute.
4. If you want to change between 12-hour (AM/PM) and 24-hour (International) time format, press the CLEAR key for 2 seconds. Press CLEAR again for 2 seconds to change back to 12-hour format.
Please refer to the CDN TM8 Digital Timer and Clock Memory User Guide for more detailed instructions and illustrations.
Add New Comment