User Manual Q&AAnswer
Jan 23, 2025 - 05:49 AM
To mount the Klipsch AW-500-SM Indoor/Outdoor Speaker on a wall, follow these steps:
1. Remove the bracket from the loudspeaker and use it as a template to mark the location of the mounting holes on the wall.
2. Check the alignment of the holes with a torpedo level before drilling the pilot hole.
3. Use #10-12 2.5” – 3” long pan head screws to attach the bracket into a wall stud. If a wall stud is not available, use the appropriate type of drywall or masonry anchor to support the weight of the speaker.
4. Affix the speaker to the bracket with the supplied knobs. Be sure to leave enough clearance between the end of the bracket and any adjacent wall or ceiling for installation of the knobs.
For more detailed instructions and illustrations, please refer to the user manual provided with the product (page 7).
Note: If you are unsure about the installation process or need assistance, it is recommended to consult a professional installer or contact Klipsch customer service for further guidance.
Add New Comment