How do I pair my Jabra Active 75t Sienna True Wireless Sports Earbuds with my mobile device? (Jabra Active 75t Wireless Sports Earbuds Instruction Guide)

Answer

manuals.plus

Jan 23, 2025 - 05:43 AM

Sure! Here are the steps to pair your Jabra Active 75t Sienna True Wireless Sports Earbuds with your mobile device:

1. Make sure your Jabra earbuds are charged and turned on.
2. On your mobile device, go to the Bluetooth settings.
3. Turn on Bluetooth if it's not already enabled.
4. On your Jabra earbuds, press and hold the button on the right earbud for about 3 seconds until the LED light on the earbud flashes blue.
5. On your mobile device, you should see "Jabra Active 75t" or a similar name in the list of available devices. Tap on it to connect.
6. If prompted, enter the PIN code 0000 to complete the pairing process.
7. Once connected, you should see a confirmation message on your mobile device.

Note: The exact steps may vary slightly depending on your mobile device's operating system. Refer to the user manual for your specific device if needed.

If you encounter any issues during the pairing process, try the following troubleshooting steps:

1. Ensure that your Jabra earbuds are within close proximity to your mobile device.
2. Restart your mobile device and try pairing again.
3. Reset your Jabra earbuds by placing them in the charging case and holding the button on the case for about 15 seconds until the LED light on the case flashes purple.
4. If you have previously paired your Jabra earbuds with another device, make sure to remove that pairing before attempting to pair with your current device.

For more detailed instructions and troubleshooting tips, refer to the user manual that came with your Jabra Active 75t Sienna True Wireless Sports Earbuds.