User Manual Q&AAnswer
Jan 23, 2025 - 05:38 AM
To install the BOSE FreeSpace FS2C and FS4CE Adjustable Tile Bridge, please follow the steps below:
1. Assemble the Tile Bridge:
- Align the rails and insert the tabs into the slots.
- Pull the rails outward to secure them together.
- Note: If installing in a hard ceiling, assemble the tile bridge after inserting the rails and ring through the hole cutout.
- Align the rails parallel to each other and press the tile bridge ring down to secure the ring to the rails.
2. Installing a Tile Bridge in Acoustic Ceiling Tile:
- Cut the Ceiling Tile:
- Remove the tile and use the template included with your loudspeaker to trace a loudspeaker hole onto the tile. Center the template on the tile by drawing an X connecting the corners diagonally and centering the template using the crossing point.
- Cut a hole into the tile according to the traced template.
- Installing the Tile Bridge:
- Place the assembled tile bridge across the ceiling grid. Adjust the tile bridge if needed so that the rails rest on the ceiling grid.
- Replace the tile in the ceiling.
3. Installing a Tile Bridge in Hard Ceiling (Existing Construction):
- Cut the Ceiling:
- Use the template to trace a hole onto the ceiling.
- Cut a hole into the ceiling according to the traced template.
- Installing the Tile Bridge:
- Insert the tile bridge rails and ring through the hole and place the rails parallel to each other across the ceiling grid or ceiling furring.
- Assemble the tile bridge.
For detailed instructions on loudspeaker installation, please refer to the "Mounting the Loudspeaker" section in the appropriate loudspeaker installation guide.
Please note that it is important to consult local building codes and regulations and ensure the installation is performed by a professional installer.
Add New Comment