User Manual Q&AAnswer
Jan 23, 2025 - 05:31 AM
To ensure clear audio when using your Jabra Engage 65 Stereo Wireless Headphones with your desk phone, there are a few things you can do:
1. Verify the correct settings for the Dial Tone Switch: The Dial Tone Switch on the base of the headset should be configured to match your desk phone. You can refer to the Jabra Compatibility Guide to find the correct setting for your specific phone model. In most cases, Switch A works for Avaya and most other phones, Switch B for Cisco and Avaya Callmaster 5 and 6, Switch C for Kirk Delta, Switch D for Tenovis, Switch E for Innovaphone, Switch F for other phones, and Switch G for Toshiba (most models) and Dealerboards (including IPC and BT).
2. Position the microphone correctly: To maximize speech quality and noise cancelling capabilities, make sure the microphone is positioned close to your mouth. If the microphone is long enough, position it approximately 1 inch from your mouth.
3. Adjust the microphone volume: The volume level of the headset microphone should approximately match the audio level of your desk phone. Use the Microphone Volume Control switch on the base of the headset to adjust the volume up or down as needed.
By following these tips, you should be able to achieve clear audio when using your Jabra Engage 65 Stereo Wireless Headphones with your desk phone. For more detailed instructions, you can refer to the Quick Start Guide or user manual provided with your Jabra device.
Add New Comment