User Manual Q&AAnswer
Jan 23, 2025 - 05:30 AM
To connect the Alva Solo to your turntable and amplifier, follow these steps:
1. Firstly, connect the outputs of your turntable to the MM input sockets on the Alva Solo using high-quality RCA interconnects.
2. If your turntable uses a separate ground lead, connect this to the ground xxxx on the Alva Solo. This reduces any potential hum or buzzing.
3. Connect the signal output sockets of the Alva Solo to a line-level input on your amplifier.
4. Ensure that the balance control is set to the central position. This can be adjusted later if necessary.
5. Attach the mains power lead securely to the Alva Solo and power on the unit.
Please refer to the "Getting connected" section of the instruction manual for more detailed instructions and illustrations.
Note: Make sure not to connect the Alva Solo to a phono-level input, as it is designed for moving magnet cartridges.
Add New Comment