Answer

Jan 23, 2025 - 05:11 AM
To load and play a CD on the Cambridge Audio AXC25 CD Player, follow these steps:
1. Make sure your amplifier is switched on and set to the correct input.
2. Press the "Open/Close" button on the front panel or remote control to open the disc tray.
3. Carefully place a CD with the label side facing upwards into the tray.
4. Press the "Open/Close" button again to close the tray. The CD player will read the disc and display the content information on the display.
5. To begin playback, press the "Play" button.
6. To stop the disc at any point, press the "Stop" button. To pause the disc, press the "Pause" button. Playback can be resumed by pressing the "Play" button again.
7. To locate a specific track during playback, press the forward "Skip/Scan" button to go to the beginning of the next track or the reverse "Skip/Scan" button to go to the beginning of the previous track.
8. To repeat a specific track, press the "Repeat" button on the remote control. "RPT ONE" will appear on the display. Press "Play" and the selected track will repeat until the function is turned off. To repeat the entire disc, press the "Repeat" button twice and "RPT ALL" will appear on the display. To turn off the repeat function, press the "Repeat" button until "RPT OFF" appears on the display.
9. To play tracks in random order, press the "Random" button on the remote control. "RAN ON" will appear on the display. Press "Play" and the CD player will play the entire disc in random order. Press the "Random" button again to exit random mode.
10. To program disc play, press the "Prog" button on the remote control. Use the forward and reverse "Skip/Scan" buttons or enter the track number to program as the first track. Press the "Prog" button to confirm the track. Repeat this process to program additional tracks, up to a maximum of 20. Press the "Play" button to begin programmed playback. To clear all programmed tracks, press the "Prog Clear" button on the remote control.
Please refer to the Cambridge Audio AXC25 CD Player User Manual for more detailed instructions and information.
Add New Comment