User Manual Q&AAnswer
Jan 23, 2025 - 04:58 AM
To install and connect the CHD2MUW 2.5 Inch Hard Drive Box USB 2.0, please follow the steps below:
1. Start by preparing your 2.5" SATA hard disk. Ensure that it is compatible with the enclosure.
2. Slide the screwless casing open by gently pushing the slider mechanism.
3. Place your 2.5" SATA hard disk into the enclosure, making sure it is properly aligned with the SATA connector inside.
4. Once the hard disk is in place, slide the screwless casing back into position to secure the hard disk inside the enclosure.
5. Connect one end of the USB 2.0 cable to the USB Mini-B female port on the enclosure.
6. Connect the other end of the USB cable to an available USB port on your computer.
7. The CHD2MUW 2.5 Inch Hard Drive Box USB 2.0 is plug and play, so your computer should automatically detect and install the necessary drivers.
8. Once the drivers are installed, you can access your hard disk through your computer's file explorer or disk management utility.
Please refer to the CHD2MUW Multilingual quick installation guide included in the package for more detailed instructions and troubleshooting tips.
Note: Make sure to handle the hard disk and enclosure with care to avoid any damage during installation or use.
Add New Comment