Answer
Jan 23, 2025 - 04:47 AM
To set up the Zmodo SD-H1080P-Z Wireless Security Camera System, follow these steps:
1. Plug in and power on all cameras near your router for initial setup. Attach the antennas to the cameras if applicable.
2. Ensure that you have a strong WiFi connection at the location of your cameras.
3. Know the SSID (WiFi network name) and password of the 2.4GHz WPA-PSK/WPA2-PSK WiFi network you want your cameras to connect to. Note that your network cannot be hidden.
4. Make sure your network meets the bandwidth requirements: at least 1Mbps upload speed for each camera when live viewing or 2Mbps upload speed for each camera when using the cloud service.
5. Download and install the "Zmodo" app from Google Play or the App Store. Launch the app and sign up for a free Zmodo account. All your devices will be bound to this account.
6. Log in to the app and press the "Add Device" option on the Home Page.
7. Select the "QR Code" connection method to connect your device(s). Follow the in-app instructions or refer to steps 3-9 to complete the setup.
8. Power on your device(s). The status light will blink green when the device has powered on.
9. Turn up the volume on your phone for voice prompts during the mobile setup process.
10. Connect your phone to the 2.4GHz WPA-PSK/WPA2-PSK WiFi network you want your device(s) to connect to. Tap "Next" to proceed.
11. Enter the password of the WiFi network you want your device(s) to connect to. Ensure that your WiFi password is correct. Tap "Next" to proceed.
12. Hold your phone's display steadily in front of your Zmodo camera until you hear "Device connected." Maintain a distance of about 8 inches between your phone and the camera.
13. Name your device(s) and set a password for them. Tap "Next" to proceed.
14. Your device(s) have been successfully configured. Tap "Done" to finish. You can now share or view your devices.
For more detailed instructions and troubleshooting, refer to the Zmodo SD-H1080P-Z Wireless Security Camera System user manual.
Add New Comment