User Manual Q&AAnswer
Jan 23, 2025 - 04:43 AM
To pair your Jabra Evolve2 85 USB A UC Stereo Wireless Headphones with your device, please follow these steps:
1. Ensure that your headphones are charged and turned off.
2. On your device, go to the Bluetooth settings and make sure Bluetooth is enabled.
3. Press and hold the Bluetooth button on the right earcup of the headphones for about 3 seconds until the LED light starts flashing blue.
4. On your device, search for available Bluetooth devices. The Jabra Evolve2 85 should appear in the list of available devices.
5. Select the Jabra Evolve2 85 from the list to initiate the pairing process.
6. If prompted, enter the PIN code 0000 to complete the pairing process.
7. Once the pairing is successful, the LED light on the headphones will turn solid blue, indicating a successful connection.
Please note that the exact steps may vary slightly depending on your device and operating system. For more detailed instructions, you can refer to the user manual provided with your Jabra Evolve2 85 headphones or visit the Jabra support website at the following link: [Jabra Evolve2 85 Support](https://www.jabra.com.au/supportpages...)
Add New Comment