User Manual Q&AAnswer
Jan 23, 2025 - 04:37 AM
The installation process for the KUFATEC BMW 640d Complete Set Active Soundbooster involves several steps. Here is a step-by-step guide based on the provided instruction manual:
1. Safety Precautions: Before starting the installation, ensure that the vehicle is turned off and the battery is disconnected. Also, make sure to follow all safety instructions mentioned in the manual, especially when working with the airbag system.
2. Removing Trim Panels: Begin by removing the trim panel on the passenger's side and the side trim panel in the trunk. These panels may require the use of appropriate tools for removal.
3. Connection of CAN-Bus, Ignition Lead, and Ground: Connect the CAN-Bus, ignition lead, and ground wires according to the instructions provided. These connections are crucial for the proper functioning of the soundbooster.
4. Installation of Pushbutton: Install the pushbutton in a suitable location, following the instructions provided. This pushbutton will be used to control the soundbooster.
5. Routing Connecting Cable for Sound Generator: Route the connecting cable for the sound generator according to the provided instructions. Ensure that the cable is securely fastened and properly routed to avoid any interference with other components.
6. Installation of Sound Generator: Install the sound generator in the designated location, using suitable high tensile screws. It is recommended to use threadlock or similar material to prevent loosening of the screws due to vibration. Regularly check the stability of the sound generator and retighten the screws if necessary.
7. Additional Safety Measures: As an additional safety measure, tighten the delivered steel cable and retaining clips on the sound generator and at a suitable position in the car. This will provide added security in case the tightening screws become loose due to vibration.
8. Final Checks: After completing the installation, double-check all connections and ensure that everything is properly secured. Reinstall any trim panels that were removed during the installation process.
Please note that this is a general overview of the installation process. For detailed instructions and illustrations, it is recommended to refer to the complete instruction manual provided by KUFATEC GmbH & Co. KG. If you encounter any difficulties during the installation, you can contact their technical support for assistance.
Add New Comment