User Manual Q&AAnswer
Jan 23, 2025 - 04:28 AM
To connect your Vivitek D835 Smart Projector to your computer or other devices, follow these steps:
1. Make sure your computer or device is turned off.
2. Locate the appropriate video output port on your computer or device. This could be a VGA, HDMI, or DisplayPort.
3. Connect one end of the appropriate cable (VGA, HDMI, or DisplayPort) to the video output port on your computer or device.
4. Locate the corresponding video input port on the back of the projector. The Vivitek D835 Smart Projector supports VGA, HDMI, and DisplayPort inputs.
5. Connect the other end of the cable to the video input port on the projector.
6. Turn on your computer or device.
7. Turn on the projector by pressing the Power button on the control panel or the remote control.
8. Use the Input button on the control panel or the remote control to select the correct input source that matches the port you connected to (VGA, HDMI, or DisplayPort).
9. Once the input source is selected, you should see the display from your computer or device on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the Vivitek D835 Smart Projector.
Add New Comment