User Manual Q&AAnswer
Jan 23, 2025 - 04:25 AM
Sure! Here is a step-by-step guide on how to assemble and install the KUFATEC Complete Set Electrical Tailgate:
1. Start by locating the tailgate button (1) and mount it in a convenient and easily accessible location on your vehicle's interior.
2. Next, find the closing aid and tailgate lock (2) and install it according to the manufacturer's instructions. This component is responsible for automatically closing and locking the tailgate.
3. Locate the warning buzzer (3) and mount it in a suitable location. This buzzer will provide audible alerts when the tailgate is being operated.
4. Find the control unit/ground connection (4) and connect it to the appropriate wiring harness. This control unit is responsible for managing the electrical functions of the tailgate.
5. Install the electronic tailgate damper (5) according to the manufacturer's instructions. This component helps to control the opening and closing of the tailgate.
6. Locate the fuse box (6) and connect the necessary wiring to ensure proper power supply to the electrical components of the tailgate.
7. Find the CAN gateway (7) and connect it to the vehicle's CAN bus system. This gateway allows for communication between the various electrical components of the tailgate.
Please note that the above steps are a general guideline and may vary depending on your specific vehicle model. It is important to refer to the detailed cable routing instructions provided in the manual for your specific vehicle. These instructions will provide a more accurate and detailed description of the installation process.
If you have any further questions or need additional assistance, please refer to the instruction manual that came with your KUFATEC Complete Set Electrical Tailgate. The manual should provide comprehensive information and diagrams to guide you through the installation process.
Add New Comment