User Manual Q&AAnswer
Jan 23, 2025 - 04:17 AM
To assemble the ENSTO SJKDS4X50 Heat Shrink Joint, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Gather all the necessary parts mentioned in the "PARTS" section of the manual. These include CPEEPL85-25, PA23, CPEEL50-16, PEE64/150, CPEEPL51-16, PEM-SJKD4X50 PEM2034, and CPEEPL33-8.
2. Start by placing the CPEEPL85-25 (800 mm) part on a clean and dry surface.
3. Attach the PA23 part to the CPEEPL85-25, ensuring a secure connection.
4. Take the CPEEL50-16 (500 mm) part and connect it to the other end of the PA23 part.
5. Attach the PEE64/150 part to the CPEEL50-16, making sure it is properly secured.
6. Now, take the two CPEEPL51-16 (200 mm) parts and connect them to the PEE64/150 part, one on each side.
7. Attach the PEM-SJKD4X50 PEM2034 part to the CPEEPL51-16 parts, ensuring a tight connection.
8. Finally, take the four CPEEPL33-8 (240 mm) parts and attach them to the PEM-SJKD4X50 PEM2034 part, evenly distributed around it.
9. Once all the parts are properly connected, carefully follow the heat shrinking instructions provided in the manual to ensure a secure and reliable joint.
It is important to refer to the specific instructions and diagrams provided in the ENSTO SJKDS4X50 Heat Shrink Joint Instruction Manual for accurate assembly.
Add New Comment