User Manual Q&AAnswer
Jan 23, 2025 - 04:09 AM
To install the NOVY 6830 Ceiling Hood Pureline, follow these steps:
1. Ensure that the structure on or in which the appliance is to be installed can bear its weight.
2. Check the condition of the appliance and the installation fittings as soon as you remove them from the packaging. Remove the appliance from the packaging with care. Do not use sharp knives to open the packaging.
3. Do not install the appliance if it is damaged. In that case, inform Novy.
4. Read the directions for use and the installation instructions before installing and using this appliance. You will find important information here for the assembly and use of the appliance.
5. Decide whether you want to make an extraction duct to the outside or use the extractor hood as a recirculation extractor hood. If opting for recirculation, you will find the recirculation kit with the accessories in the installation instructions.
6. Install the exhaust duct for optimal performance of the cooker hood. Use smooth, non-flammable pipes with an internal diameter that is equal to the external diameter of the connection nozzle of the hood. Avoid right-angle bends and use rounded bends for effective airflow. Ensure that the extraction duct is not crushed and that there are no kinks in the duct. Use a hose clamp or aluminum tape for airtight connections.
7. Ensure that there is sufficient air supply. Fresh air can be supplied by slightly opening a window or an outside door or by installing an inlet grate. The appliance may not be connected to a flue or chimney that is currently in use or that serves as ventilation for rooms with hearths.
8. Connect the appliance to a socket with earth (230V - 50Hz). Do not use an extension cable for the connection to the electrical mains.
9. Make a cut-out opening in the mounting plate according to the dimensions specified in the manual.
10. Depending on the desired exhaust opening direction (right, left/front/rear, or upwards), follow the specific instructions in the manual to connect the exhaust duct and install the ceiling unit.
11. Tighten the clamping screws by hand to secure the ceiling unit permanently.
Please note that these are general instructions, and it is recommended to refer to the specific instructions in the manual for your model (NOVY 6830 Ceiling Hood Pureline) for detailed installation steps and safety precautions.
Add New Comment