Answer
Jan 23, 2025 - 03:54 AM
To install the Superior Life NovaLux 55508 LED Linear High Bay, please follow these steps:
1. Remove the LED fixture from the packaging and inspect for any damages. Handle the fixture with care.
2. For standard chain mount installation, install the chain into the provided wire hanger. Secure the other end of the chain to a structure using hardware rated for the load. Install the wire hanger on the side of the top LED channel. Ensure that the wiring hangers are fully engaged into the side holes on the top channel. Additional mounting options are available (refer to page 2 of the manual).
3. Connect the LED high bay wiring to the line voltage wire. Connect the black wire to the hot wire, the white wire to the neutral wire, and the green wire to the ground wire. Use only UL-listed wiring.
- Note: Inside the driver compartment, there may be purple and pink (or gray) wires which are 0-10V dimming leads. These should only be connected to dimming low-voltage wiring if you are using a 0-10V dimming circuit. If you are not connecting the fixture to a dimming circuit, make sure to cap off the dimmer leads separately from each other to avoid improper fixture operation and voiding the warranty.
4. Clean any residues or fingerprints from the LED high bay and lens. Double-check all hanging hardware before proceeding with the installation.
For more specific information and diagrams, please refer to the "INSTALLATION" section of the instruction manual provided with the product.
Please note that it is recommended to consult a qualified licensed electrician if you are unsure about the installation or maintenance of the luminaires, and to always follow the National Electrical Code and any applicable local code requirements for electrical connections.
For any further questions or concerns, you can contact the manufacturer, P.Q.L., Inc., at 800-323-8107 or visit their website at www.PQLighting.com.
Add New Comment