How do I mount the SBOX LCD2901 Swivel Wall Bracket to the wall? (SBOX LCD2901 Swivel Wall Bracket Instruction Manual)

Answer

manuals.plus

Jan 23, 2025 - 03:50 AM


To mount the SBOX LCD2901 Swivel Wall Bracket to the wall, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:

Step 1: Mounting the Wall Plate to the Wall
- Use a 3.8mm drill bit to drill holes in the wall according to the specified hole pattern in the manual.
- Attach the wall plate securely to the wall using appropriate screws and anchors (not included).

Step 2: Mounting the VESA 200 Plate to a TV
- Locate the VESA mounting holes on the back of your TV.
- Attach the VESA 200 plate to the TV using the provided screws.

Step 3: Attaching TV to Wall Plate
- Lift the TV and align the VESA 200 plate with the wall plate.
- Hook the VESA 200 plate onto the wall plate and ensure it is securely attached.

Step 4: Leveling Mount
- After the mount is installed on the wall, you can re-level it if needed.
- Hold the TV and adjust the leveling by rotating the front plate the TV sits on until it is level.

Please note that the supplied parts and hardware are not suitable for installation on walls with steel studs or cinder block walls. If you encounter any difficulties or if the necessary hardware is not included, it is recommended to consult a qualified installation contractor or visit a local hardware store for appropriate mounting hardware.

Always prioritize safety during installation and use proper safety equipment. If you have any doubts or concerns about the installation process, it is advisable to seek professional assistance.