User Manual Q&AAnswer
Jan 23, 2025 - 03:47 AM
To install the ABH Manufacturing A110HD Aluminum Continuous Gear Hinges Full Mortise with fire studs, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Install the hinge per the installation instructions for the specific model you have.
2. For the frame side, drill and tap four 12-24 holes for the fire studs.
3. For the door side, drill four 3/4" diameter holes in the door to correspond to the stud holes in the frame side.
4. Insert the studs into the four tapped frame holes and tighten them securely.
5. Slowly close the door, making sure that the studs are properly aligned.
6. If there is any minor interference, it can be taken care of using a round metal file.
Please note that these instructions are specific to using the ABH Manufacturing A110HD hinge with fire studs. Make sure to refer to the installation instructions provided with your specific model for accurate installation steps.
If you need further assistance or have any other questions, you can visit the ABH Manufacturing website at www.abhmfg.com or contact their customer support via email at abhinfo@abhmfg.com. You can also reach out to Architectural Builders Hardware Mfg., Inc. at their address: 1222 Ardmore Ave., Itasca, IL 60143. Their phone number is 630.875.9900, and the fax number is (932.9224).
Add New Comment