User Manual Q&AAnswer
Jan 23, 2025 - 03:14 AM
To switch between the HDMI devices connected to the level one 332703 3x1 HDMI Switch, you can follow the steps below:
1. Ensure that all the HDMI devices and the HDMI switch are powered on and properly connected.
2. Identify the HDMI input ports on the HDMI switch. In this case, there are three HDMI input ports labeled as "HDMI Input 1," "HDMI Input 2," and "HDMI Input 3."
3. Use the included HDMI cables to connect your HDMI devices to the respective HDMI input ports on the HDMI switch.
4. Once all the devices are connected, turn on your TV or projector and set it to the HDMI input that is connected to the HDMI output port of the switch.
5. Locate the manual push button switch on the HDMI switch. It is usually located on the front or top panel of the device.
6. Press the push button switch to cycle through the connected HDMI devices. Each press will switch to the next HDMI input port.
7. Monitor the display on your TV or projector to confirm that the desired HDMI device is now being shown.
Note: The level one 332703 3x1 HDMI Switch does not require any software or power supply. It is a simple plug-and-play device that automatically detects and switches between the connected HDMI devices.
Add New Comment