User Manual Q&AAnswer
Jan 23, 2025 - 02:53 AM
To connect your Vivitek D560ST DLP Smart Projector to your device, follow these steps:
1. Make sure your device (e.g., laptop, computer, smartphone, etc.) has an appropriate video output port, such as HDMI, VGA, or DVI.
2. Locate the corresponding video input port on the projector. The Vivitek D560ST DLP Smart Projector supports various input ports, including HDMI, VGA, and composite video.
3. Connect one end of the video cable (e.g., HDMI, VGA, etc.) to the video output port on your device.
4. Connect the other end of the video cable to the corresponding video input port on the projector.
5. Power on your device and the projector.
6. Use the projector's remote control or the control panel buttons to select the appropriate input source. Refer to the user manual for specific instructions on how to navigate the projector's menu and select the input source.
7. Once the input source is selected, you should see the content from your device projected onto the screen.
Note: Depending on your device and the projector's capabilities, you may need to adjust the display settings on your device to ensure optimal compatibility and resolution.
For more detailed instructions and illustrations, please refer to the Vivitek D560ST DLP Smart Projector User Manual, specifically the sections related to connecting and setting up the projector. You can access the manual using the link provided in your question.
Add New Comment