User Manual Q&AAnswer
Jan 23, 2025 - 02:50 AM
To connect the Jabra PanaCast 50 Room System MS to your computer, please follow these steps:
1. Ensure that your computer is powered on and running.
2. Locate the USB-C cable that came with the Jabra PanaCast 50 Room System MS.
3. Connect one end of the USB-C cable to the USB-C port on the back of the video bar.
4. Connect the other end of the USB-C cable to an available USB port on your computer.
5. Wait for your computer to recognize the Jabra PanaCast 50 Room System MS. This may take a few moments.
6. Once the system is recognized, you can start using it for video conferencing and virtual meetings.
Note: Make sure that you have installed any necessary drivers or software provided by Jabra for optimal performance. You may need to download and install the Jabra Direct software from the Jabra website.
For more detailed instructions and troubleshooting tips, you can refer to the user manual provided with the Jabra PanaCast 50 Room System MS or visit the Jabra support page at the following link: [Jabra PanaCast 50 Room System MS Support Page](https://www.jabra.in/supportpages/jab...)
Add New Comment