User Manual Q&AAnswer
Jan 23, 2025 - 02:17 AM
To connect your Sharp PG-M10X Smart Projector to your computer, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on your computer and wait for it to boot up.
7. Turn on the projector by pressing the Power button.
8. Use the Input button on the projector or the remote control to select the appropriate input source (VGA or HDMI) for your computer.
9. Once the input source is selected, your computer's display should appear on the projector screen.
Please note that depending on your computer's settings, you may need to adjust the display settings to ensure the projector is recognized as an external display. Refer to your computer's user manual for instructions on adjusting display settings.
For more detailed information and troubleshooting tips, please refer to the Sharp PG-M10X Smart Projector Operation Manual provided in the link above.
Add New Comment