User Manual Q&AAnswer
Jan 23, 2025 - 01:48 AM
To change the hinge position on your Smeg CP177TNE Combined Built-In Refrigerator, please follow the instructions below:
1. Ensure that the refrigerator is unplugged and empty before starting the process.
2. Locate the hinge cover on the top of the refrigerator door. It is a plastic cover that conceals the hinge mechanism.
3. Gently pry off the hinge cover using a flathead screwdriver or your fingers.
4. Once the hinge cover is removed, you will see the hinge pin and screws.
5. Using a screwdriver, remove the screws that secure the hinge to the refrigerator door.
6. Carefully lift the door off the hinge pin and set it aside.
7. Locate the hinge bracket on the opposite side of the refrigerator opening.
8. Remove the screws that secure the hinge bracket to the refrigerator.
9. Carefully lift the hinge bracket off the refrigerator and set it aside.
10. Take the door and place it on the hinge pin on the opposite side of the refrigerator opening.
11. Align the hinge bracket with the holes on the refrigerator and secure it with the screws.
12. Place the hinge cover back onto the top of the refrigerator door and press it firmly to snap it into place.
Please note that the above instructions are a general guide. For detailed and specific instructions, it is recommended to refer to the user manual provided with your Smeg CP177TNE Combined Built-In Refrigerator.
Add New Comment