User Manual Q&AAnswer
Jan 23, 2025 - 01:35 AM
Installation of the KEUCO 59557 IXMO 2-Way Stop and Diverter Valve should be done by a professional installer. Here are the general steps for installation:
1. Start by turning off the water supply to the area where you will be installing the valve.
2. Remove any existing fixtures or components from the installation area.
3. Follow the installation dimensions provided in the manual and refer to the installation picture for guidance.
4. Use only neutrally netting silicone for sealing purposes.
5. Ensure correct installation and test the functionality of the valve.
6. Tighten the cartridge nut with a torque of 20-30 Nm.
7. Once the installation is complete, turn on the water supply and check for any leaks.
8. After installation, hand over the instructions to the user for operation and maintenance.
Please note that these are general instructions and it is important to refer to the specific instructions provided in the manual for your product. If you have any doubts or concerns, it is recommended to consult a professional installer or contact KEUCO UK Ltd for further assistance.
Add New Comment