User Manual Q&AAnswer
Jan 23, 2025 - 01:21 AM
To connect your Jabra Evolve2 75 USB-C Wireless Headset to your computer, please follow these steps:
1. Ensure that your computer has a USB-C port or an available USB-A port if you are using a USB-C to USB-A adapter.
2. Turn on your Jabra Evolve2 75 headset by pressing and holding the power button located on the right earcup until the LED light turns on.
3. Connect the USB-C cable (or USB-C to USB-A adapter) to the USB-C port on your headset.
4. Connect the other end of the USB-C cable to the USB-C port (or USB-A port with the adapter) on your computer.
5. Wait for your computer to recognize the headset. It may take a few seconds for the drivers to install.
6. Once the headset is connected, you should see a notification on your computer indicating a new audio device has been detected.
7. Open your preferred communication or conferencing application (e.g., Microsoft Teams, Zoom, Skype) and go to the audio settings.
8. In the audio settings, select the Jabra Evolve2 75 as your audio input and output device.
9. Test the headset by making a test call or playing audio to ensure it is working correctly.
Note: If you are using Jabra Direct software, make sure it is installed and up to date to ensure optimal performance and access to firmware updates.
For more detailed instructions or troubleshooting, you can refer to the official Jabra Evolve2 75 USB-C Wireless Headset manual available on the Jabra support page provided in the link above.
Add New Comment