User Manual Q&AAnswer
Jan 23, 2025 - 01:20 AM
To install and use the BIAN02B SD Card Reader USB 3.0, please follow the steps below:
1. Plug the USB connector of the card reader into an available USB port on your computer.
2. Wait for your computer to recognize the new device. It should automatically install the necessary drivers.
3. Once the installation is complete, you can start using the card reader.
4. To use the card reader, insert an SD, SDHC, SDXC, Micro SD/T-Flash, Micro SDHC, or Micro SDXC card into the appropriate slot on the card reader. Make sure to align the card correctly with the slot.
5. The LED indicator on the card reader will light up to indicate that the card is detected.
6. You can now access the files on the inserted memory card. Open the file explorer on your computer and navigate to the card reader's drive letter. It should appear as a removable storage device.
7. To safely remove the memory card, right-click on the card reader's drive letter in the file explorer and select "Eject" or "Safely Remove Hardware." Wait for the notification that it is safe to remove the device before physically removing the memory card.
Please note that the BIAN02B SD Card Reader USB 3.0 is a plug and play device, meaning it should work without the need for additional software or drivers. However, if you encounter any issues, refer to the multilingual quick installation guide included in the package for troubleshooting steps.
For further assistance or more detailed instructions, please refer to the product manual or contact the manufacturer's customer support.
Add New Comment