User Manual Q&AAnswer
Jan 23, 2025 - 12:52 AM
To install the TOP LIFT PROS Door Lift correctly, please follow these steps:
1. Lay out all the parts: Before starting the installation, make sure you have all the necessary parts laid out in front of you.
2. Install the lower arm in the specified direction: The lower arm should be installed as shown in the instructions, with both hooks on the same side.
3. Mount the Door Lift centered for rear doors: For rear doors, ensure that the Door Lift is mounted in the center.
4. Engage the hooks: Make certain that both hooks at the top of the Door Lift are engaged, as well as a single hook at the bottom of the door lip.
5. Adjust for front doors: For front doors, slide the long brace forward a third of the crossbar.
6. Use foam protectors if desired: If you want to protect the door edge, you can cut the foam protectors to the desired length and slit them. Then place them along the door edge.
7. Install the wire loom hanger: Place the wire loom hanger as shown in the instructions.
By following these installation steps, you will be able to correctly install the TOP LIFT PROS Door Lift. For further details and visual guidance, please refer to the user guide provided with the product.
Add New Comment