User Manual Q&AAnswer
Jan 23, 2025 - 12:01 AM
To connect your Jabra Evolve 75 SE UC Stereo Office Wireless Headset to your computer, please follow these steps:
1. Ensure that your computer has Bluetooth capability. If not, you may need to use the included Jabra Link 380 Bluetooth adapter.
2. Turn on your Jabra Evolve 75 SE headset by pressing and holding the power button located on the right earcup until the LED light turns solid blue.
3. On your computer, open the Bluetooth settings. This can usually be found in the system tray or by searching for "Bluetooth" in the Start menu.
4. Enable Bluetooth on your computer if it is not already enabled.
5. On your Jabra Evolve 75 SE headset, press and hold the Bluetooth button located on the right earcup until the LED light starts flashing blue.
6. In the Bluetooth settings on your computer, click on the option to add a new Bluetooth device. Your computer should start searching for nearby devices.
7. When your Jabra Evolve 75 SE headset appears in the list of available devices, click on it to initiate the pairing process.
8. Follow any on-screen prompts to complete the pairing process. You may be asked to enter a passcode, which is usually "0000" or "1234".
9. Once the pairing is successful, the LED light on your Jabra Evolve 75 SE headset will turn solid blue, indicating a successful connection.
10. To ensure that your Jabra Evolve 75 SE headset is set as the default audio device on your computer, refer to the previous instructions on how to manually set it as the default audio device in the Sound settings.
For more detailed instructions and troubleshooting, you can refer to the Jabra Evolve 75 SE UC Stereo Office Wireless Headset manual, which can be found on the Jabra support website: [insert link to the manual].
Add New Comment