User Manual Q&AAnswer
Jan 22, 2025 - 11:55 PM
To install the FLOS ARCHITECTURAL Light Shadow PRO, please follow these instructions:
1. Before starting the installation, ensure that the power is disconnected.
2. The device is designed for indoor use only.
3. The luminaire is classified as P20 Ordinary.
4. It has an IP X4 protection rating, which means it is protected against water splashes.
5. It is also protected against the penetration of dust with an IP 5X rating.
6. The luminaire is classified as Class I, which means it operates at a very low safety voltage. Connect the main cables to the remote LED power supply SELV under the EN 61347-2-13 standard, ensuring the correct polarity (red positive, black negative). Do not connect devices with a very low safety voltage showing the (BTS) mark to earthing conductors.
7. The luminaire is intended for direct assembly on surfaces that are normally flammable.
8. Do not cover the luminaire with insulating or similar materials.
9. If the flexible cable or cord of the luminaire is damaged, it should be replaced exclusively by the manufacturer, their technical service, or a qualified person to avoid any risk.
10. Use appropriate equipment in accordance with the standard.
11. The luminaire should only be used with Flos accessories or components.
For more detailed instructions and safety information, please refer to the FLOS ARCHITECTURAL Light Shadow PRO Installation Guide.
Add New Comment