User Manual Q&AAnswer
Jan 22, 2025 - 11:21 PM
To connect the Aktobis AG WDH-IFH20 (20 kW Power Fan Heater to a power source, you will need a suitable power cable. The power cable is not included in the package, so you will need to use a five-pole power connection cable with the following specifications: 380V/415V (50/60Hz, 32A) and a five-core power cable H07RN-F (5G4 mm²).
Here are the steps to connect the power cable properly to the heater:
1. Open the protective flap of the five-pole power connection located at the back of the heater.
2. Connect the plug head of the power cable to the socket provided for this purpose at the back of the heater. Make sure the power connection is firmly seated in the connecting socket.
3. Connect the power plug properly to a power socket.
It is important to ensure that the power cable is properly connected and that the plug is clean and securely connected to the socket before using the appliance. Always make sure to use the recommended voltage for operating the unit.
Please note that the heater is not suitable for use outdoors or in wet or damp environments.
Add New Comment