How do I connect the Symetrix Prism 0x0 or Prism 4x4 to my computer? (Symetix Prism 0x0 4x4 User Guide)

Answer

manuals.plus

Jan 22, 2025 - 11:18 PM

To connect the Symetrix Prism 0x0 or Prism 4x4 to your computer, you will need a Windows PC with the following specifications: 1 GHz or higher processor, Windows 7 or higher operating system, 250 MB free storage space, 1280x1024 graphics capability, 16-bit or higher colors, internet connection, 512 MB or more of RAM, and a network (Ethernet) interface.

Here are the steps to connect the Prism 0x0 or Prism 4x4 to your computer:

1. Make sure your computer meets the above specifications.
2. Connect the Prism 0x0 or Prism 4x4 hardware device to your computer using a CAT5e RJ45 cable.
3. Plug in the power cable appropriate for your locale into the Prism 0x0 or Prism 4x4 hardware device.
4. Connect the other end of the CAT5e RJ45 cable to your computer's network interface or an existing Ethernet network.
5. Power on the Prism 0x0 or Prism 4x4 hardware device.
6. Install the Composer software on your computer by downloading the software installer from the Symetrix website (http://www.symetrix.co). Double-click on the downloaded file and follow the on-screen instructions to install the software.
7. Once the software is installed, refer to the Help File within Composer for full connection and configuration information.

If you encounter any issues or have further questions, you can contact Symetrix's Customer Support Group by phone at +1.425.778.7728 ext. 5 (available from 6:00 am to 5:00 pm PST, Monday through Friday), through their website at https://www.symetrix.co, via email at support@symetrix.co, or through their forum at https://forum.symetrix.co.

Please note that the above information is based on the user manual provided by Symetrix for the Prism 0x0 and Prism 4x4. For more detailed instructions and troubleshooting, please refer to the user manual or contact Symetrix's Customer Support Group.