How do I set up the Motorola VM481 Video Baby Monitor? (Motorola VM481 Video Monitor User Guide)

Answer

manuals.plus

Jan 22, 2025 - 11:15 PM


Sure! Here are the step-by-step instructions for setting up the Motorola VM481 Video Baby Monitor:

1. Connecting the Baby Unit to power:
   - Insert the DC plug of the power adapter into the DC jack on the side of the Baby Unit.
   - Connect the other end of the power adapter to a suitable power outlet.
   - Slide the ON-OFF switch on the Baby Unit to the ON position.

2. Installing the battery and connecting the Parent Unit to power:
   - Unclip and remove the battery compartment cover on the Parent Unit.
   - Fit the rechargeable battery pack into the battery compartment.
   - Replace the battery compartment cover and pull out the stand.
   - Insert the DC plug of the power adapter into the DC socket on the side of the Parent Unit.
   - Connect the other end of the power adapter to a suitable power outlet.
   - Press and hold the power button on the Parent Unit to turn it On or Off.

Note: Make sure to use the power adapter and battery pack provided with the product. The Parent Unit can work with the power adapter connected, but without a battery pack installed.

3. Desktop Mount of Parent Unit:
   - Flip the stand from the rear of the Parent Unit to the open position for the desktop mount.

Once both the Baby Unit and Parent Unit are turned on, the Parent Unit should display the color image from the Baby Unit camera. If the room is dark, the image will be in black and white with an infrared illumination icon.

For more detailed information and troubleshooting tips, please refer to the user guide provided with the Motorola VM481 Video Baby Monitor.