User Manual Q&AAnswer
Jan 22, 2025 - 10:47 PM
To clean the washable filter of the PHILIPS 900W PowerCyclone 8 Bagless Vacuum Cleaner, follow these steps:
1. Ensure that the appliance is turned off and unplugged from the power source.
2. Locate the washable filter, which is usually located near the dust container or inside the appliance.
3. Remove the washable filter from the appliance according to the instructions provided in the user manual.
4. Rinse the washable filter under running water to remove dust and debris. You can use a mild detergent if necessary.
5. Gently shake the filter to remove excess water.
6. Place the filter in a well-ventilated area and allow it to air dry completely. Do not dry the filter in direct sunlight, on a radiator, or in a tumble dryer.
7. Once the filter is completely dry, reinsert it back into the appliance according to the instructions provided in the user manual.
It is important to note that if the washable filter cannot be cleaned properly or if it is damaged, it should be replaced with a new one. Always use original Philips filters of the correct type for optimal dust retention and performance. You can purchase these filters from the Philips website, authorized dealers, or contact the Philips Consumer Care Center for assistance.
Add New Comment