User Manual Q&AAnswer
Jan 22, 2025 - 10:46 PM
To manually change the output level on the Dwyer CSG Current and Voltage Calibrator, follow these steps:
1. Make sure the device is powered on by either installing a battery or plugging in the AC adapter.
2. Plug the test lead assembly into the appropriate output jack based on whether you want to simulate current or voltage.
3. If the test leads are plugged into the mA XMTR or mA OUTPUT jack, or if no leads are plugged in, the display will show "mA". If the leads are plugged into the VOLTS OUTPUT jack, the display will show "V".
4. To increase the output level, press the "+" key. To decrease the output level, press the "-" key. The new output value will be displayed on the LCD screen.
Please refer to the Dwyer CSG Current and Voltage Calibrator User Guide for more detailed instructions and illustrations.
Add New Comment