User Manual Q&AAnswer
Jan 22, 2025 - 10:41 PM
To install the wire holder, follow these steps:
1. Locate a suitable wall stud near your water source area.
2. Place the wire holder against the wall at the desired height and mark the positions of the xxxx holes.
3. Drill pilot holes at the marked positions using the appropriate size drill bit.
4. Insert the provided anchors into the pilot holes.
5. Align the wire holder with the anchors and insert the screws through the holes in the wire holder, tightening them into the anchors.
6. Ensure that the wire holder is securely mounted to the wall.
Please refer to the included instructions for more detailed installation steps and illustrations.
Note: It is recommended to mount the wire holder close to the faucet area for easier access and convenient storage.
Add New Comment