User Manual Q&AAnswer
Jan 22, 2025 - 10:30 PM
To set the power settings on the SIP T1 Series Gasless MIG Welder, follow these steps:
1. Locate the power switch on the front panel of the welder and make sure it is in the OFF position.
2. On the Weldmate T126 model, there are two power settings available. On the Weldmate T136 model, there are four power settings, and on the Weldmate T166 model, there are six power settings.
3. For the Weldmate T126 model, turn the power switch to the desired power setting: either the low power setting or the high power setting.
4. For the Weldmate T136 model, turn the power switch to the desired power setting: either the lowest power setting, the second-lowest power setting, the second-highest power setting, or the highest power setting.
5. For the Weldmate T166 model, turn the power switch to the desired power setting: either the lowest power setting, the second-lowest power setting, the third-lowest power setting, the third-highest power setting, the second-highest power setting, or the highest power setting.
6. Once you have selected the desired power setting, you can proceed with your welding operation.
Note: The appropriate power setting will depend on the thickness of the material you are welding. It is recommended to consult the user manual or seek guidance from a qualified professional to determine the correct power setting for your specific welding application.
Add New Comment