How do I install the door panel on my FISHER PAYKEL ADDD60DPX Double DishDrawer? (FISHER & PAYKEL ADDD60DPX Dishdrawer Door Panel User Guide)

Answer

manuals.plus

Jan 22, 2025 - 10:20 PM


To install the door panel on your FISHER PAYKEL ADDD60DPX Double DishDrawer, please follow these steps:

1. Ensure that the DishDrawer is empty and turned off before starting the installation process.

2. Locate the door panel and the fixing brackets that came with your DishDrawer. The fixing brackets are usually included with the door panel.

3. Position the door panel in front of the DishDrawer, aligning it with the front of the unit.

4. Attach the fixing brackets to the sides of the DishDrawer. The brackets should be positioned vertically, with the top bracket aligning with the top of the DishDrawer and the bottom bracket aligning with the bottom of the DishDrawer.

5. Use a screwdriver to secure the fixing brackets to the DishDrawer. Refer to the user manual for the specific  xxxx  size and placement.

6. Once the brackets are securely attached, align the door panel with the fixing brackets. The panel should fit snugly between the brackets.

7. Use a screwdriver to secure the door panel to the fixing brackets. Refer to the user manual for the specific  xxxx  size and placement.

8. Double-check that the door panel is aligned properly and securely attached to the DishDrawer.

9. Turn on the DishDrawer and test the door panel by opening and closing it to ensure smooth operation.

If you encounter any difficulties during the installation process, it is recommended to contact Fisher & Paykel's Customer Care Centre at 1300 650 590 for further assistance.